![background image](http://html.mh-extra.com/html/gmc/r-4-bulldozer/r-4-bulldozer_user-manual_2235695009.webp)
2.8 Connecting FPIO to Mainboard
① Connecting wires carry the
LEDs and switch connections
from the LEDs and switches
located behind the front bezel.
The switch and LEDs
connections are attached to the
LEDs and switches by wires to
header connectors that plugs
into pins on your mainboard.
② Take the connections from the
LEDs and switch header
connectors and locate the
corresponding pins on your
mainboard. Each mainboard is
different; consult your mainboard
installation guide for the correct
installation information. The
diagram shown at the left is for
example purposes only.
2.7 Case LED & Switch Connections
These connectors are for USB
2.0 ports. Connect the USB
module cable to any of these
connectors.
Chapter 2. Installation
▪
Connect USB Pin to Mainboard