2.1 Side Panel Removal
2.2 HDD Installation
Chapter 2. Installation
① Remove the panel
thumbscrews from a side
panel and open it by swinging
it outwards.
② Inside the chassis,
there are HDD Bay,
120mm cooling fan at
the rear as well as
some wiring with
marked connectors.
(USB, PWR etc.)
① The HDD cage of R-4
‘Bulldozer’ is different with
normal case as well as it is
installed vertically. It is
located at the top-front of
Chassis. Unscrew the
circled part and pull out the
drive bay from the chassis.
② Fasten the drive in place
using the screws that case
includes. Two HDDs can
be mounted.