2.3 ODD Installation
④ Put the cover back to
the case.
③ Connect the
appropriate power and
interface connectors from
the power supply and
motherboard to the device
(IDE, S-ATA).
② There 8 screws at both
sides to mount the ODD.
Chapter 2. Installation
③ Screw the circled part
and attach the HDD to the
drive bay.
① To install the ODD, you
just need to lift up the ODD
panel: it is tool-less. Hold
the low part of the ODD
cover and pull out.
(Note: Don’t need to
separate the whole front
panel from the Chassis)