6
GB
Specifications
Voltage:
230–240V~, 50 Hz
Power:
750W
No load speed:
800-3000min
-1
Blades:
Universal and bayonet shank
Pendulum:
3 Stage
Cutting angle range:
0° to 45°, left and right
Cutting depth in:
Wood:
100mm
Steel:
8mm
Laser class:
2
Laser wavelength:
650nm
Laser output power:
≤1mW
Weight:
2.7kg
Sound and vibration information:
Sound Pressure L
PA
:
94.5dB(A)
Sound Power L
WA
:
105.5dB(A)
Uncertainty K:
3dB
Typical Weighted Vibration:
Cutting Wood:
3.4m/s
2
Cutting Metal Sheet:
2.8m/s
2
Uncertainty:
1.5m/s
2
As part of our ongoing product development, specifications of GMC
products may alter without notice.
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds
85dB(A) and limit the time of exposure if necessary. If sound levels are
uncomfortable, even with ear protection, stop using the tool immediately
and check the ear protection is correctly fitted and provides the correct
level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of
touch, numbness, tingling and reduced ability to grip. Long term exposure
can lead to a chronic condition. If necessary, limit the length of time
exposed to vibration and use anti-vibration gloves. Do not operate the tool
with hands below a normal comfortable temperature, as vibration will have
a greater effect. Use the figures provided in the specification relating to
vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according
to EN60745 or similar international standards. The figures represent
normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of
noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users
who use tools for long periods of time.
GENERAL SAFETY INSTRUCTIONS
WARNING. Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
WARNING: This appliance is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of experience
or knowledge unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the
appliance.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1. WORK AREA SAFETY
a. Keep work area clean and well lit. Cluttered and dark areas invite
accidents.
b. Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. ELECTRICAL SAFETY
a. Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adaptor plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce risk of electric
shock.
920308_Z1MANPRO1.indd 6
24/09/2013 14:15
