3.
Connect harness 12-pin plug (See
Fig. 3
) into radio 12-pin connector
vacated in step 1
Fig. 3
12-pin plug
4.
Carefully route audio jack (See
Fig. 4
) to a location on dash or nearby
where it will be mounted (within 4 ft.).
Fig. 4
5.
Optional:
Drill a ¼” hole in
dash or panel. Push jack threated shaft
through hole and secure with nut (See
Fig. 5
)
Fig. 5
Warning:
Jack may be left freestanding, but to mount, ensure panel is
no thicker than 1/8”
otherwise shaft may not protrude enough to
engage with nut. If necessary, use dremel, sander etc. to thin panel,
Operation
1.
Turn r
adio “ON”
2.
Press “
BAND
” or “
CD/AUX
“button
(depends on vehicle option)
If subscribed, most recent XM channel or if equipped with remote CD
changer, select track will play
3.
Connect audio device to 3.5mm jack using included 3 ft. audio cable
(See
Fig. 6
) or similar
4.
Press play on audio device. XM or CD Changer playback is interrupted.
Fig. 6
3.5mm Male-Male audio cable
5.
Use radio volume button to set playback level.
Warning
: Playlist and Track selection is *NOT* possible from the Radio.
You must use the audio devices built-in controls to access audio files
.
6.
To listen to XM, Remote (external) CD changer or DVD Player, simply
disconnect 3.5mm audio cable
from jack
and operate XM/ CD
changer/DVD as customary. (
Jack must be empty
)
7.
If correct operation is confirmed go ahead and reinstall the GM radio
