GMC 2010 T-Series, Owner'S Manual

Page: 212 / 294

3. Put on the wheel nuts.
4. Finger-tighten the nuts.
5. Oil the surfaces (B)
between the nuts (C)
and washers (A). Do
not oil the studs or the
threads of the nut.
6. Tighten the nuts to 400 lb ft (540 Y ) if an 8-hole
stud or 475 lb ft (640 Y ) if a 10-hole stud, using
the following diagrams.
8-Hole
10-Hole (Front) 10-Hole (Rear)
5-64