GMC 2008 Envoy Denali Owner'S Manual Download

Page: 31 / 468

4. To make the lap part tight, pull up on the

shoulder belt.

It may be necessary to pull stitching on the safety
belt through the latch plate to fully tighten the
lap belt on smaller occupants.

To unlatch the belt, push the button on the buckle.
The belt should go back out of the way.

Before you close a door, be sure the belt is out of the
way. If you slam the door on it, you can damage
both the belt and your vehicle.

1-27

Summary of Contents for 2008 Envoy Denali





















































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Envoy Denali

Reviews:

Related manuals for 2008 Envoy Denali

Brands by name

Popular brands

GMC 2008 Envoy Denali, Owner'S Manual

Search results

Summary of Contents for 2008 Envoy Denali

Reviews:

Related manuals for 2008 Envoy Denali

Brands by name

Popular brands