GMC 2008 Envoy Denali Owner'S Manual Download

Page: 140 / 468

Hazard Warning Flashers

The hazard warning flashers warn others. They also
let the police and other emergency vehicles know you
have a problem.

The hazard warning
flasher button is located
on top of the steering
column.

Press the button to make the front and rear turn signal
lamps flash on and off. Press the button again to turn the
flashers off.

The hazard warning flashers work no matter what
ignition position the key is in, and even if the key is
not in the ignition.

When the hazard warning flashers are on, your vehicle’s
turn signals will not work.

Other Warning Devices

If you carry reflective triangles, you can set them up at
the side of the road about 300 feet (100 m) behind
your vehicle.

Horn

To sound the horn, press the horn symbols on the
steering wheel pad.

Tilt Wheel

The tilt lever is on the
outboard side of the
steering column, under
the turn signal lever.

Do not adjust the steering wheel while driving.

Hold the steering wheel and pull the lever toward you to
change the position, then release the lever to lock.

3-6

Summary of Contents for 2008 Envoy Denali





















































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Envoy Denali

Reviews:

Related manuals for 2008 Envoy Denali

Brands by name

Popular brands

GMC 2008 Envoy Denali, Owner'S Manual

Search results

Summary of Contents for 2008 Envoy Denali

Reviews:

Related manuals for 2008 Envoy Denali

Brands by name

Popular brands