Playing a DVD
There are three ways to play a DVD:
•
Once a DVD is inserted, the system will
automatically start play of the DVD up to the
DVD top menu. The
r
(play) button must
be pressed to start the movie from the DVD’s
menu screen.
•
If you are on a map screen, select the DVD
screen button.
•
Press the AUDIO hard key, then select the
DVD screen button.
•
The
r
(play) button must be pressed for the
movie to resume play when the vehicle has
been turned OFF and then back ON.
When a DVD is loaded, the rear seat passengers
can power on the RSE video screen and use
the remote control to navigate through the DVD.
O
(Power/Volume): Press this knob to turn
the system on and off. Turn the knob to increase
or decrease the volume of the audio system.
Press and hold this knob for more than two seconds
to turn off the navigation system, RSE video screen,
and RSA. If the vehicle has not been tuned off,
the RSE and the RSA can be turned back on by
pressing this knob and will continue play of the last
active source.
DVD Menu Options
Once a DVD starts to play, the menu options and
cursor screen buttons will automatically appear.
To display the menu Options screen button while a
DVD is playing, touch anywhere on the screen.
Options: Select this screen button to view the
menu option screen buttons. Menu options are
available when they are highlighted. Some menu
options are only available when the DVD is not
playing.
Cursor: Select this screen button to access the
cursor menu. The arrows and other cursor options
allow you to navigate the DVD menu options.
The cursor menu options are only available if a
DVD has a menu. Use the cursor menu to start a
DVD video from the disc main menu.
77