GMC 2004 Savana Page 67 Owner'S Manual Download

Page: 67 / 398

If your child restraint does not have the LATCH system,
you will be using the lap belt to secure the child
restraint in this position.

Be sure to follow the instructions that came with the
child restraint. Secure the child in the child restraint
when and as the instructions say.

1. Make the belt as long as possible by tilting the latch

plate and pulling it along the belt.

2. Put the restraint on the seat.

3. Run the vehicle’s safety belt through or around the

restraint. The child restraint instructions will show
you how.

4. Buckle the belt. Make sure the release button is

positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.

1-61

Summary of Contents for 2004 Savana















































































































































































































































































































































































































Search results

Summary of Contents for 2004 Savana

Reviews:

Related manuals for 2004 Savana

Brands by name

Popular brands

GMC 2004 Savana, Owner'S Manual

Search results

Summary of Contents for 2004 Savana

Reviews:

Related manuals for 2004 Savana

Brands by name

Popular brands