GMC 2004 Savana Owner'S Manual Download Page 292

Page: 292 / 398

A. Heavy, Unpainted Metal Engine Part or Remote

Negative (

−

) Terminal

B. Good Battery or Remote Positive (+) and Remote

Negative (

−

) Terminals

C. Dead Battery or Remote Positive (+) Terminal

To disconnect the jumper cables from both vehicles, do
the following:

1. Disconnect the black negative (

−

) cable from the

vehicle that had the dead battery.

2. Disconnect the black negative (

−

) cable from the

vehicle with the good battery.

3. Disconnect the red positive (+) cable from the

vehicle with the good battery.

4. Disconnect the red positive (+) cable from the other

vehicle.

5. Return the positve (+) remote terminal to its original

position.

Jumper Cable Removal

5-46

Summary of Contents for 2004 Savana















































































































































































































































































































































































































Search results

Summary of Contents for 2004 Savana

Reviews:

Brands by name

Popular brands

GMC 2004 Savana, Owner'S Manual

Search results

Summary of Contents for 2004 Savana

Reviews:

Brands by name

Popular brands