GMC 2004 Savana Owner'S Manual Download Page 58 | Manualshive

Page: 58 / 398

GMC 2004 Savana Owner'S Manual Download Page 58

Lower Anchorages and Top Tethers
for Children (LATCH System)

If you have a passenger van, it may have the LATCH
system. If it does, you’ll find two sets of anchors (A)
in the second row of seats in the driver and passenger
side seating positions, where the seatback meets
the seat cushion.

This system, designed to make installation of child
restraints easier, does not use the vehicle’s safety belts.
Instead, it uses vehicle anchors (A, B) and child
restraint attachments to secure the restraints. Some
restraints also use another vehicle anchor to secure a
top tether strap (C).

1-52

«
...
56
57
58
59
60
...
»

Summary of Contents for 2004 Savana















































































































































































































































































































































































































Reviews:

No comments