INSTALLATION INSTRUCTIONS
SHEET OF
PART NO.
1
19166682
AUTH
DR
DATE
REVISION
ALL INFORMATION WITHIN
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
SHEET OF
19166682
PART NO.
1
TITLE
Wheel Liner Rear
IR 01JN07
Wheel Liner Rear
6200 Grand Pointe Dr., Grand Blanc, MI 48439
3
3
01JN07
Wheel Liner Rear
Please read instruction thoroughly before starting.
Installation time: 30 minutes
Package Contents:
Description
Quantity
Left Hand Wheel Liner
1
Right Hand Wheel Liner
1
Plastic Retainer
6
Self-tapping Screw
8
Installation Instructions
1
Tools Required:
Clean Cloth/Rag
5/16” (7mm) Socket/Driver
Drill Motor
Installation Procedure:
1.
For ease of installation, tires can be removed.
2.
Clean the underbody panel where the wheel liners are to be
located.
3.
Mount the wheel liner on under body panel. Be sure that the
upper portion of the wheel liner is mounted behind flange and
around the wheel house opening as shown in Figures 1, 2 and 3.
4.
Install plastic retainer in locations 1, 2, and 3 as shown in
Figure 4.
5.
Install self-tapping screws in locations 4, 5, 6 and 7 as shown
in Figure 5.
6.
Repeat procedure for other side as shown in Figure 6.
7.
Wheel liners can be cleaned with any commercially available
cleaner.
In
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5
FIGURE 6
1
2
3
4
5
6
7
