FUTURE
Cod. 21206-00 7
5.2.- ELECTRICAL INSTALLATION
•
Ensure mains connection is 230 VACS, 50 Hz and 10 A, with a socket
with grounding (same type as machine plug).
•
Installation should meet Low Voltage Installation Regulations.
•
Once you have installed the machine, check the effectiveness of the
ground connection.
5.3.- LEVELLING
(ONLY WHEN STAND IS USED)
•
Once the machine has been placed in
its final location, adjust the legs until it
is completely stable and level.
5.4.- START-UP
•
Connect the machine to power point and turn
on the main switch. Make sure that there is at
least one tobacco packet in one of the
channels. The machine will carry out an
internal check and finally will appear on the
display “PLEASE INSERT TOKEN”
5.5.- RELATIONSHIP PRODUCT CHANNEL/SELECTIONS
•
When loading product, note the relationship between product channels
and selection buttons.
•
All machines have a label where the relationship between product
channels and selection buttons are indicated.
•
If
the
machine
has
more
selection buttons than product
channels, you will need to
combine product channels. (See
Chapter
01.19
of
the
programming options.).
•
Place each product label on the
corresponding selection button.
•
When loading the tobacco check
that the packets are not stuck to
one another.
