7
Main signal B1:
Port setting:
Controller port B, Signal divider port 1(1 represents B1). Fill in the correct rows of
controlled by controller port B (Note this is not the rows for the whole screen), Rows 3, Columns 8. Click
“Build” button and then will come out a diagram.
Address setting:
Click the simulative panels piece by piece according to the practical signal
transmission way of port OUT2. The address distribution of B1 is as the red arrow shown below
Addresses Setting steps for Main Signal
Main Signal A1
Port setting: Controller port A, Signal divider port 1(1 represents A1). Fill in the correct rows of controlled
by controller port A (Note this is not the rows for the whole screen), Rows 3, Columns 8. Click “Build” button
and then will come out a diagram.
Address setting: Click the simulative panels piece by piece according to the practical signal
transmission way of port OUT1. The addresses distribution of A1 is as the red arrow shown below
