4
SIG A8
SIG A7
SIG A6
SIG A5
SIG A4
SIG A3
SIG A2
SIG A1
(3) Network signal input, signal cascaded itself by network cable
It is very important to correctly understand the port number for the intelligent address settings in the
control software. Please make sure select correct controller port and signal divider port before you start to set
the address as shown below picture.
You can only use the intelligent setting method to set the display address of the LED screen if there is
one or more signal divider connected with VSP-F2L4 controller. Please select correct controller port and
signal divider port , otherwise, you won't see the image change of the LED screen when you start the address
setting.
Each time can only set one signal divider output port's addresses of LED panels. Please remember to
rebuild a simulator diagram firstly when you set another port's addresses of LED panels.
Function description
Network
signal
cascade output
Network
signal
input to Group
A
