8
Backup signal A2
:
Port setting:
Controller port A, Signal divider port 2(2 represents A2). Fill in the correct rows of
controlled by controller port A (Note this is not the rows for the whole screen), Rows 3, Columns 8. Click
“Build” button and then will come out a diagram.
Address setting:
Click the simulative panels piece by piece according to the practical signal
transmission way of port OUT1. The address distribution of A2 is reverse to the A1, as the red arrow shown
below
Backup signal B2
Port setting:
Controller port B, Signal divider port 2(2 represents B2). Fill in the correct rows of
controlled by controller port B (Note this is not the rows for the whole screen), Rows 3, Columns 8. Click
“Build” button and then will come out a diagram.
Address setting:
Click the simulative panels piece by piece according to the practical signal
transmission way of port OUT2. The address distribution of B2 is reverse to the B1, as the red arrow shown
below