Unpacking/Preparing the Processor
General
Carefully unpack the machine and check that all parts are present according to the en-
closed packing list and in good condition.
Installation Kit
Installation and spare parts kits are included with the processor. They comprise the
different parts necessary to make the installation and some key components as spare
parts.
See the packing list(s) delivered with the equipment for further information.
Removing the Fenders and Stand Panels
To lower the processor and to make the installation you must first remove the fenders
and the stand panels from the processor:
•
Remove the screws
(1)
securing the fenders to the stand.
•
Lift off the fenders
(2)
and
(3)
.
•
Release the locks
(4)
of the stand panels by pulling them outwards (two on each
panel).
•
Lift off the panels
(5)
and
(6)
.
1049
Installation Manual - Plate Processor 150
2-7
Installation
Unpacking/Preparing the Processor
T31671
5
2
6
3
1
1
1
1
4
