GLP impression FR1O BAR, Quick Start And Safety Manual

Page: 20 / 28

www.glp.de
20 impression
FR10 Bar Quick Start and Safety Manual Rev. A
9. Service
Removing the front cover
The FR 10 Bar is supplied with a clear front cover
installed. It is possible to remove the front cover for
cleaning or to replace it with one of the custom front
covers available from GLP.
To remove the front cover:
Place the fixture on a work surface with the head
upright.
See Figure 8. Slide the two front cover quick-
release knobs (arrowed) down towards the base.
Keeping the release knobs held down, slide the
front cover out of the front of the fixture.
When replacing the front cover or installing a
diffuser, hold the release knobs down and slide the
front cover into the channels in the front of the
fixture. Release the knobs and check that the front
cover is prevented from sliding out of the channels.
Cleaning
FR 10 Bar fixtures require occasional cleaning to prevent the buildup of dust, dirt, and
residue from atmospheric effects. Failure to keep the fixture clean will significantly
reduce light output and may cause heat buildup and damage that is not covered by
the product warranty. Regular cleaning will ensure maximum performance and
reliable operation.
The cleaning schedule depends on the operating environment. Check fixtures
regularly for signs of dirt buildup.
You can clean the fixture using a soft cloth slightly dampened with a household or
automotive glass cleaning product. Do not apply pressure to the clear front or display
on the back of the fixture, as you may scratch these surfaces.
Warning! There are no user-serviceable parts inside the fixture. Any service
operation that requires removal of a cover must be performed by a
professional service technician with the tools, skills, and personal
protective equipment to maintain high-powered lighting equipment safely
and efficiently.
Figure 8. Front cover quick-
release knobs