GLP impression FR1O BAR, Quick Start And Safety Manual

Page: 19 / 28

German Light Products®
Impression FR10 Bar Quick Start and Safety Manual Rev. A
19
8. Starting and stopping operation
Warning! Before you apply power to the fixture or operate it after a
blackout, make sure that nobody is looking directly into the front of the
fixture and that there is sufficient clearance for the head to tilt safely.
The FR 10 Bar’s TRUE1 mains power input connector supports hot-plugging, and
connecting and disconnecting a live power cable is an option, especially if you need
to shut down power urgently, but it is still good practice to shut down power to the AC
mains power circuit before connecting and disconnecting power cables.
To start operation, check that nobody is looking into the front of the fixture and that
there is no risk of collision of the head tilts without warning, then apply power to the AC
mains power circuit.
To stop operation, shut down power to the AC mains power circuit.
Transportation and storage
We strongly recommend that you transport the FR 10 Bar either in a flightcase or in its
original packaging to protect it from damage during transportation. The product
warranty does not cover damage caused by abnormal shocks during transportation
and handling.
When the fixture is not installed, disconnect it from power and store it in a dry location.