GLP Fusion EXO Spot 30, User Manual

Page: 8 / 43

www.glp.de Safety
8 EXO Spot 30 User Manual Rev. A
ignite objects that are in contact with the surface. Ensure that the front surface Is
clean and unobstructed at all times in order to prevent a fire hazard and damage
to the fixture.
●
The fixture’s optical components can focus the sun’s rays, creating a risk of fire and
damage. Do not expose the front of the fixture to sunlight or any other intense light
source, even from an angle.
Eye safety
●
The EXO Spot 30 is classified as a Risk Group 3 lighting fixture according to EN 62471.
Possibly hazardous radiation emitted. Do not stare into the light output from the
fixture. May be harmful to the eyes.
●
Do not look at the fixture’s light output with optical instruments or any device that
may concentrate the light output.
●
Make sure that persons near to or working on the fixture are not looking directly into
the light output when the fixture lights up suddenly. This can happen when power is
applied, when the fixture receives a DMX signal, or when certain control menu items
are selected.
●
The warning below is printed on the fixture. If the warning becomes impossible to
read, replace it with a label reproduced from this illustration:
●
Provide well-lit conditions to reduce the pupil diameter of anyone working on or
near the fixture.
Strobe safety
●
Flashing light, particularly at 5 - 30 Hz, may cause seizures in persons with
photosensitive epilepsy. Do not use strobe effects for extended periods.
●
Comply with local regulations on the use of strobe lighting and notify the public in
advance with highly visible warning signs when strobe effects are used.
●
If a seizure occurs, stop using strobe effects. Seek professional medical help. Note
the time that the seizure starts and finishes. Call emergency medical help urgently if