• Adjust the cable so it does not get snagged.
• Secure the product to the mounting bracket by locating
the screws through the “L” shaped slots (3) in the ceiling
cover and tightening the screws.
• Replace fuse or circuit breaker and switch on. Your light
is now ready for use.
• When changing a bulb, always switch off at the mains
and allow the bulb to cool before handling. Dispose of
used bulbs carefully. Do not exceed the wattage stated
or use a different shape bulb from that indicated on the
fitting.
• Use a soft cloth to handle bulbs, avoid directly touching
the bulbs as this will shorten their life.
• Remove bulb by turning a quarter turn anticlockwise and
pulling out.
• Push the bulb gently into the lampholder and twist a
quarter turn clockwise to engage pins.
Commissioning
Fitting/replacing bulbs
Instruction leaflet
Grove Four Light Spotlight
EL-10047
www.saxbylighting.com
For your safety, always switch off the supply before changing lightbulbs, or cleaning.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
Recycling advice
Safety information
Saxby Lighting Ltd. LS9 0SE
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could
damage the finish.
Glass parts – Wipe clean with a damp cloth. Do not use
abrasive materials as these will damage the finish.
50W GU10
Mains Halogen
Iss.2 25092015
