GLP Fusion EXO Spot 30, User Manual

Page: 30 / 43

www.glp.de Control menu layout
30 EXO Spot 30 User Manual Rev. A
Yellow 0-255
Gobo Wheel 1 0-255
Gobo Wheel 2 0-255
Gobo 2 rotation coarse 0-
255
Gobo 2 rotation fine 0-255
Shutter 0-255
Dimmer Coarse 0-255
Dimmer Fine 0-255
Frost 0-255
Prism 0-255
Prism rotation 0-255
Focus coarse 0-255
Focus fine 0-255
Zoom 0-255
Control 0-255
Capture Scene
Press ENTER for 3 sec to
capture incoming DMX
state
INFORMATIO
N
Firmware Version ver x.x Fixture firmware version
Fixture Details Serial … xx / RDM … xx
Show fixture serial, RDM
unique ID
Device Life Total / User
Shows power cycles,
Power Hours, LED Hours
DMX Link Status
Refresh Rate (Hz) / Frame
Length / Mode Length
Details of DMX signal
Temperatures xxx… Unit temperatures
Fan Speeds Fan1 …
Error Log Xxx
SERVICE
Test All Running
Press Enter to start test,
Menu or Enter to stop
Test Pan only Running
Test Tilt only Running
Test LED only Running
Test Zoom only Running
Default Settings See Note 1 below
Service Advanced See below for menu
Hold Enter for 6 sec to
enter this menu
FACTORY
MENU
This menu is for use by authorized service technicians only
Note 1: Default Setting will return all options to default except DMX address, Control
Mode. It does not erase captured scene, preset settings or offset values
Default settings are written in BOLD type.