German Light Products®
11
Rev.
20210303-01
Power mode
•
N
– Normal. Output is balanced for long performance with
optimized output. Performance time depends on intensity
level and color. Continuous performance without battery
charges requires an external power supply of minimum 2
amps.
•
H
– High Power. Output is optimized for highest brightness.
Performance time depends on intensity level and color.
Continuous performance without battery charges requires
an external power supply of minimum 3 amps.
•
E
– Eco. Output is optimized for longest performance time
between battery charges. Performance time depends on
intensity level and color. Continuous performance without
battery charges requires
an external power supply of
minimum 2 amps.
Signal status
•
Show
– Fixture is in Manual Mode. The standalone pattern
can be selected using the IR remote control or the
integrated control buttons.
•
No Signal
(CL1+ only) – Fixture is in DMX Mode but is not
receiving DMX data via CRMX. The fixture is following the
settings that are currently active in the NO-SIGNAL
BEHAVIOR menu.
•
DMX
(CL1+ only) – Fixture is in DMX Mode and is receiving
DMX data via CRMX.
Signal source
•
IR (ON)
– Manual Mode is selected and IR remote control
is enabled. You can control the fixture using the
integrated control buttons (MANUAL CONTROL menu) or
the IR remote control.
•
IR (OFF)
– Manual Mode is selected and IR remote control
is disabled. You can control the fixture using the
integrated control buttons (MANUAL CONTROL menu).
•
CRMX
(CL1+ only) – LumenRadio CRMX module is enabled
and the CL1+ is ready to be controlled via DMX. The status
of CRMX communication is indicated as follows:
Horizontal dashes – the CRMX module is
not linked to a CRMX transmitter.
Vertical bars – the CRMX module is linked
to a CRMX transmitter. The bars indicate
signal quality.
