Glomex pandora v8000, User Manual, Page: 45 / 172

PANDORA V8000 - URANIA 2 V9330
43
E
N
GL
IS
H
www.glomex.it
3.1 OPTIONAL ACCESSORIES (NOT INCLUDED) TO USE GLOMEX ANTENNAS
To be able to use your new GLOMEX satellite
antenna for boats, you will have to procure or buy
also:
- a TV set; - a satellite receiver for channel selection.
The table below lists all the GLOMEX optional
components, with relevant code.
4. NECESSARY TOOLS FOR
ASSEMBLY (NOT PROVIDED)
Procure all tools and materials listed below. They
will be necessary to complete installation.
- Electric drill (1).
- 8.5 mm drill tip for radome assembly (2).
- 28 mm hollow mill for drilling the passage hole
for the antenna connector cable (3).
- Phillips screwdriver (with adequate dimensions
for control unit installation) (4).
- 11 mm wrench (for the installation of the coaxial
cable connectors) (5).
- Reciprocating saw (to create the compartment
in case of wall built-in installation of the control
unit; use the template provided on page
52 ) (6).
- LOCTITE ® 638 (7).
S
WARNING
Plan the whole installation before proceeding!
Please consider the lay-out of the various
components, the distance between them, the
length of the various cables and the accessibility to
the equipment once it is installed.
S
WARNING
Always lift the antenna from the lower radome and
never from the upper radome or any part inside it.
Optional accessory GLOMEX code
Satellite decoder i-CAN 1110SV TIVÙSAT 230 VAC
- 12 VDC
V9193
XDome terrestrial digital - satellite HD combi
decoder (DVB-T + DVB-S + DVB-S2) compatible
with SKY ITALIA - 230 VAC
V9192
SD card with new satellite 4.120.0077
SD card with software update 4.120.0078
Stainless steel support 0°- 5° V9500
Twin radome V8000 TWIN/V9330 TWIN
Radome painting - RAL colour chosen by the
customer
SATPAINT
Fig. 2
Upper radome
Lower radome