19
6.
It may take a few minutes for the Mini drivers to load.
7.
To connect to the Mini, right click on the Bluetooth icon
in the GlobiLab status bar, located at the bottom right corner of
the screen and select the device you want from the pop-up menu
listing the paired devices. When connected, the Bluetooth icon
will turn blue and a notice in the lower left hand corner of the
screen will indicate that you are connected to MiniDisc_xxxx.
3.2.4 Pairing the Mini with iPad
1.
Open the iPad
settings
:
2.
Open Bluetooth and make sure Bluetooth is turned on.
3.
From the list of available devices, select MiniDisc_xxxx. xxxx will
be the last four digits on the Mini’s serial number sticker.
4.
When the iPad asks for a PIN code, enter
1234
.
Press and hold
the blue center button on the Mini until the LED lights flash red
and then press “Pair” on the iPad.
5.
When you see your Mini listed as Connected, you’re ready to go.
To connect again, simply turn on your Mini and open the GlobiLab
software. If your Mini does not automatically connect to the iPad,
go to the settings menu and select the device that you want to
connect to your iPad. You can also press and hold the Logger
Setup button.
6.
When the Mini is connected - you will see a Bluetooth icon in the
corner of the Logger set up button:
