Globe GVP20, Instruction Manual

Page: 19 / 20

Page 19
Recommended Maintenance
PART REQUIRED ACTION FREQUENCY
Pump Check oil level on pump. If oil level is
low, apply pump oil to pump.
Every 10,000 cycles or when ''OIL''
appears on display.
Check to make sure oil is clear. If oil
begins to look “milky” the oil must be
changed.
When using the vacuum packaging
machine with flour products, it is
necessary to check the oil monthly.
Every 10,000 cycles or when ‘’OIL’’
appears on display.
Pump cleaning. Push the ''PUMP
CYCLE'' button and lower the lid at
the same time. Pump Cleaning will
appear on display. When cleaning is
complete, ''OIL'' will no longer display
and the program number will appear.
Every 10,000 cycles or when ''OIL''
appears on display.
Pump Heating With vacuum packaging machine
lid open, press the button ''PUMP
CYCLE'' for 3 seconds and let the
pump work for 15/20 seconds. Press
the ''PUMP CYCLE'' button to stop
the pump.
During winter time or cold weather,
it is recommended to pre-heat the
pump in the morning in order to
liquefy the oil before it circulates
throughout the vacuum packaging
machine.
Sealing Bar Clean the sealing bar with alcohol. Every 15 days. Replace sealing bar
every 200 working hours.
Silicon Bar Clean the silicon bar with alcohol. Every 15 days. Replace silicon bar
every 200 working hours.
Vacuum Packaging Accessories
XBAGS Pack of vacuum sealing bags