Page 11
Operating Instructions
Note: The quality of the seal can be verified by checking that the seal is clear. If
the seal is spotty or incomplete, increase the seal time by 0.1 second. If the
seal appears white or milky, decrease the seal time by 0.1 second.
6. Select the SEAL ‘’up’’ or ‘’down’’ arrow buttons to increase or decrease the time of sealing
(tenths of a second, between 2 and 9.9 seconds) (Figure 11-1).
7. Lower the lid to start the vacuum cycle. When lid is fully closed the vacuum cycle will
begin.
Note: To completely stop the vacuum cycle, select and hold the STOP button for
2-3 seconds.
Note: To stop the vacuum cycle and seal the vacuum sealing bag, select and hold
the STOP/SEAL button for 2-3 seconds.
8. If at anytime during the cycle, the vacuum needs to be stopped, select and hold
either the STOP or the STOP/SEAL button for 2-3 seconds.
9. Once the vacuum cycle is complete, the lid will automatically open.
USER SETTING MENU (MODEL GVP20A)
1. Hold down the SET and ON/OFF buttons for 2-3 seconds. Display will show
Language Setting (Lang) (Figure 11-1).
a. Use the ‘’up’’ or ‘’down,’’ arrow buttons to select the desired language: English,
Italian, Spanish, German or French.
b.
Select the SET button to confirm and move to the next option.
2. Vacuum sensor setting (Vac Type) (Figure 11-2).
a. Select the percentage of vacuum desired within the vacuum chamber:
0 for time in seconds or 1 for vacuum percentage.
b.
Select the SET button to confirm and move to next option.
3. Display (Figure 11-3).
Note: Display mode is used when the vacuum packaging machine is
equipped with a printer option.
a.
Select the ‘’up’’ or ‘’down’’ arrow buttons to select 0 for fixed hour/date or 1 for
intermittence hour/date.
b.
Select the SET button to confirm and move to next option.
4. Time/date setting (Figure 11-4).
a. Use the ‘’up’’ or ‘’down’’ arrow buttons to select the desired time and date.
b. Select the SET button to select the time. Time is set in 24 hour format.
c. Select the SET button to select the date. Date is set as DD/MM/YY.
d.
Select the SET button to confirm and move to the next option.
Figure 11-1
Figure 11-1
Figure 11-2
Figure 11-4
Figure 11-3
Summary of Contents for GVP20
Page 2: ...Intentionally Left Blank...
Page 4: ...Intentionally Left Blank...
Page 18: ...Intentionally Left Blank...
