Page 16
Cleaning & Sanitizing
VACUUM PACKAGING, CLEANING AND SANITIZING
1. Make sure the vacuum packaging machine is turned OFF and unplugged.
Do not place the sealing bar in a dishwasher, hand wash only.
Damage to the sealing bar can occur.
2. Remove the sealing bar. Clean the sealing bar with mild detergent and warm
water solution. Sanitize the sealing bar and allow part to air dry (Figure 16-1).
3.
Remove the filler plates. Clean the filler plates with mild detergent and warm
water solution. Sanitize the filler plates and allow to air dry (Figure
16-2).
4. With a clean damp cloth soaked in mild detergent, wipe down the lid, silicon bar
on the lid and the vacuum chamber to remove any food, debris and grease/oil
(Figure 16-3).
5. Sanitize the vacuum packaging machine following the instructions on your
quaternary sanitizer container. Allow vacuum packaging machine to air dry.
6. Make sure that all surfaces are dry before reassembling the unit.
Figure 16-3
Figure 16-1
Figure 16-2
Silicon
Bar
Sealing Bar
Summary of Contents for GVP20
Page 2: ...Intentionally Left Blank...
Page 4: ...Intentionally Left Blank...
Page 18: ...Intentionally Left Blank...
