Page 6
Installation
Panini Grill Top Plate Tension
The cast iron top grill plate is equipped with an adjustable counterweight system. To provide safe operation and
prevent damage to the product, adjustments to the cast iron top grill plate can be made.
Note: The lid should close smoothly and be able to hang suspended one to two inches from the
bottom cast iron plate. If the lid feels heavy, drops quickly or crushes product the counterweight
may need adjusted.
1.
Locate the two adjustment screws on the back of the panini grill (Figure 6-1).
BE CAREFUL NOT TO INCREASE THE
COUNTERWEIGHT MORE THAN WHAT IS
NECESSARY TO KEEP THE CAST IRON TOP GRILL
PLATE FROM SLAMMING AND/OR CRUSHING THE
PRODUCT. DAMAGE TO COUNTERWEIGHT CAN
OCCUR.
2. Use the Allen Wrench provided to adjust the counterweight.
a. Rotate the adjustment screws clockwise to increase the counterweight or
counter-clockwise to loosen the counterweight.
Leveling
Ensure the unit is sitting level before use.
Assembly
Take the waste tray and slide into the runners below the elements and place into the rack. Once in position, the
waste tray will catch any food product crumbs, grease or drippings.
COMMISSIONING:
Commissioning of your new grill is of the utmost importance. Commissioning is the thorough and methodical testing
of the equipment, sub systems, and systems to ensure that the final product functions properly and safely at the
work site. By identifying any potential problems (i.e.: equipment location, ventilation, local fire/electrical codes,
installation, operator training and certification) prior to equipment being placed into service, costly outages and
potential damages may be avoided.
SAFETY ALWAYS.
Figure 8-1
Summary of Contents for GPG1410
Page 11: ......
