Page 4
Page 13
Key Components of the Vegetable Cutter
Food Pusher Guide Rod
Food Pusher
Food Hopper
Ejection Chute
Food Pusher
Hinge Pin
Food Hopper
Base
Food Pusher
Hinge Pin
Base
Plastic Food Pusher
Continuous Feed Food Hopper
On/Off Latch
Plastic Food Pusher
Continuous Feed Food Hopper
Plastic Food Pusher
Hopper Head
Rubber Feet
GFP500
GVC550
GVC600
Cleaning
REASSEMBLY
1. Make sure that all surfaces are dry before reassembling the unit.
2. Place the ejector plate on the drive shaft. Turn plate until pin is properly aligned with the alignment pin on the
drive shaft.
3. Reinstall the hopper head by aligning the hinge with the base.
4. Secure the hopper head to the base.
a. GFP500 - Insert the hopper hinge pins into the hinge slots located on the base. Secure the
head by tightening the bottom hinge screw.
b. GVC550 and GVC600 - Place the hopper head onto the body. Insert the food pusher/hinge
pin into the hinge slot located on the base, which secures the hopper head in place.
5. Return the hopper head to its closed position.
