2
CAUTION
• This centrifuge must be located on a firm and level table.
• Make sure the centrifuge is horizontal before running.
• Make sure the angle between the door and cover is greater than 70 degrees when opening the door.
• Be careful not put your fingers or hands between the door and cover while the door is open.
• Do not move or relocate the centrifuge when it is running.
• If fluid spills in the rotor chamber, please promptly clean and dry with a dry cloth to avoid sample
contamination.
• Ensure removal of any objects and/or fragments of the tubes dropped inside the rotor chamber before
running the centrifuge.
Rotor Cautions:
• Always check for corrosion and damage on the rotor surface before using it. Do not use the rotor if an
abnormality is found.
• Do not set the speed beyond the allowable maximum speed of the rotor kits (rotor and adapters).
• Do not exceed the allowable imbalance.
• Use the rotor and tubes within their actual capacities.
• If any abnormal condition occurs during operation, please stop immediately and contact our service center.
Notify the service center of the warning code (if displayed) along with the model and serial numbers and a
detailed description of the issue.
• Vibrations are likely to damage the centrifuge. Please contact our service center if any abnormality is observed.
1. Specifications
Maximum Speed
15000rpm(200-15000rpm), increment: 10rpm
Maximum RCF
21380×g, increment: 10×g
Maximum RCF
21380×g, increment: 10×g
Maximum Capacity
1.5mL/2mL x 24, 0.5mL x 36 (optional), 4 x 8 strip PCR tubes (32 locations
total, optional), 5mL x 12 (optional), 0.2mL/0.5mL x 24 (optional adapters)
Temperature Range
-20º-40º(GCM-R-24)
Timer
30seconds -99minutes-HOLD, continuous operation
Driving Motor
Brushless DC motor
Safety Devices
Dual door interlock, Over-speed detector, Over-temperature detector,
Automatic internal diagnosis
Power Requirements
GCM-24: Single-phase, 220V-240V, 50Hz/60Hz, 5A.
110V-120V, 50Hz/60Hz, 5A
GCM-R-24: Single-phase, 220V-240V, 50Hz/60Hz, 10A.
110V-120V, 50Hz/60Hz, 10A
Dimensions (mm)
GCM-24: (L)280×(W)364×(H)266
GCM-R-24: (L)338×(W)580×(H)324
Weight
GCM-24: 12kg
GCM-R-24: 30kg
Additional features
Speed/RCF switch, Pulse operation, Processing display, Audible reminder
Important Safety Information (Cont.)
