background image

4.

It is compulsory to connect the appliance to a chimney that is suitable for 
solid fuels. The pipes from the oven to the chimney must be made of 
metal. It is also of importance to contact your chimney sweeper. 
When more stoves are connected to the one chimney the chimney 
sweeper must be consulted. The pressure (chimney draught) must be 
approximately between 6 and 15 PA. Our appliances are programmed for 
an average pressure, but the engineer can adjust this correctly when 
installing the appliance. 
In the case of a power cut the chimney will ensure that the fumes are 
disposed of safely.
If there is an extremely high chimney draught the installation of a draught 
regulator is advised.

Please pass information on to your chimney sweeper

.

 

5.

Air supply:
 

For good combustion the appliance depends on the air in the room where it 
stands. It is therefore important to take other appliances into consideration which 
displace air, such as a ventilation system or an extractor hood.  All our appliances
offer the possibility of extracting air from outside with the help of an external air 
supply pipe. This is best discussed with an engineer or your chimney sweeper.

Stove pipes:

The pipes used must be attached securely to each other and to the appliance. 
They may not protrude and the diameter of the pipe should be the same as the 
diameter of the pipe-connector. Be aware of the minimum distance to flammable 
parts. The stove pipe must be cleaned regularly, at least once a year.

Distance to flammable parts within the heat radiation area:

In the heat radiation area,  flammable building materials, furniture or even 
decorative materials must be at a distance of 100 cm measuring from the front of 
the oven.

Distance to flammable parts outside of the heat radiation area:

All flammable parts nearby the oven must be protected from the heat. The 
dividing panels on the side and at the back of the appliance may not be made of 
flammable materials or covered with flammable materials. The exact distance 
required to flammable parts of your appliance can be found at the end of this 
manual or on the back of your oven.

Summary of Contents for Pasquale

















Reviews: