16.
The correct use of the display:
Model Pasquale
Tested EN 14785, 2nd Fase of the 1st BimschV Germany
Using the display, the oven is simple to operate with a few buttons. The display and
LED indicators give information about the stove level. In the programme module the
various parameters are given which can be changed using the buttons.
LED (L0) Not in Use Button P 1 : Lower / Menu / Heating capicity
LED (L1) Progr. Capacity Button P 2 : Higher / Stove level /
LED (L2) Time switch Heating capicity
LED (L3) ON/OFF Button P 3 : ON/OFF /Stop
LED (L4) Alarm Display (D1) Level / Capacity / Parameters
LED (L5) Auger
LED (L6) Ignition
LED (L7) Smoke extraction fan
L7
L6
Menu:
By pressing the button P1 for a short length of time, you will get the menu.
The menu is split up showing more underlying items and parts which will give
access to the settings and programming of the circuit board.
17.
17.
M1 menu – Date and Time
Press P1 until M1 appears in the display. Confirm this with the ON/OFF button
(P3). Using the buttons (P1) and (P2) the correct time can be installed. This must
be confirmed using the ON/OFF button (P3). Next the day can be programmed
and confirmed with ON/OFF (P3) adding the month and confirming with ON/OFF
(P3). Finally the year can be programmed pressing the ON/OFF (P3) until the
time appears again.
M2 menu – Programme installation (timer):
Sub menu M2-1- Programme activation
Keep P1 pressed until M1 appears, then press P2 until M2 appears in the display
and confirm this with ON/OFF (P3). Open the menu M2-1 and confirm with
ON/OFF (P3) and activate the programme with the arrow (P1) on ON. Then
return by pressing ON/OFF for a few moments (P3) and activate the programme.
Sub-menu M2-2- Daily programme
Two ON/OFF cycles for every day
Sub-menu M2- 3 Weekly programmes
Four ON/OFF cycles, the days can be selected for each hour.
Sub-menu M2-4 Week end programma
Two ON/OFF cycles, for Saturday or Sunday
Programme installation:
Go to the required programme by pressing the ON/OFF (P3) button and confirm
the programme by pressing the P2 button. ON will appear. Press ON/OFF (P3)
for starting time and select this with the buttons P1 and P2. It is only in the
weekend programme that you press programme to select the days, using the
ON/OFF button in between to choose the days.
You can start or switch off the programme with the buttons P1 and P2. When
selecting the hours and days press the ON/OFF button until the startup display
appears. When the correct times have been selected a green light LED (L2) will
appear next to the clock in the left hand top corner of the display.