1
1
4
4
This document is the exclusive property of GlobalTop Tech Inc. and should not be distributed, reproduced, into any other format without
prior permission of GlobalTop Tech Inc. Specifications subject to change without prior notice.
Copyright © 2014 GlobalTop Technology Inc. All Rights Reserved.
EV-Kit User Manual (BLE Module)
GlobalTop Technology
Ver. A01
Document #
3.2.4 BLE Module using other profile connection PIN header Interface
Step 1:
Connect Jumper (JP5) to Ground (marked GND).
Step 2:
Insert CR2032 coin battery.
Step 3: Dip Switch (S2), push all four buttons down to OFF position.
Step 4:
Using PIN Header define to execute hardware function.
All of applications profile base on customization function.
The PIN Header (P1) function for GPIO is defined below.
