8
8
This document is the exclusive property of GlobalTop Tech Inc. and should not be distributed, reproduced, into any other format without
prior permission of GlobalTop Tech Inc. Specifications subject to change without prior notice.
Copyright © 2014 GlobalTop Technology Inc. All Rights Reserved.
EV-Kit User Manual (BLE Module)
GlobalTop Technology
Ver. A01
Document #
3. Operating Instruction
3.1 Select your application profile for configuration
Profiles are Security, Lighting, and SPP
3.1.1 BLE Module loaded with SPP profile
Connect the USB cable between PC and EV-Kit. The USB cable is used to power
the EV-Kit and to transfer communication data with PC. Configure the EVK as
described in the following steps.
Step 1: Jump (JP5) connected to ground (marked GND).
Step 2: Slide the switch (SW1) to the left to turn ON.
Step 3: Dip Switch (S2), push the first button up to ON position.
Step 4: LED 1 and LED2 LEDs should be light up as shown in the photo.
