8. IR Control Operations
The IR control can realize two-way control function, and the 8 IR
OUT ports are corresponding to the 8video inputs one to one, and
switch following the corresponding video source.
The example, illustrated in
Figure 3 and Figure 4
:
1) To control far-end display: The IR Receiver (
Rx1
) is connected
to the switcher IR IN port. The HDBT output connector on the
switcher is connected via CAT5e/6/7 cable to an HDBT
receiver. The HDBT receiver connect to a TV via HDMI, and
the IR Transmitter (
Tx2
) is connected to the HDBT receiver IR
OUT port.
To control this machine(switcher) or far-end display device
from local by using corresponding remote controller.
Figure 3
2) Control local device (DVD, Switcher, etc) from remote: The IR
Receiver (
Rx2
) is connected to the HDBT receiver IR IN port.
The HDBT output connector on the switcher is connected via
CAT5e/6/7 cable to an HDBT receiver. The IR Transmitter
(
Tx1
) is connected to the switcher IR OUT port.
Ver1.1 Page 9 of 21
