Connect with Component Video (YPbPr) Source:
Operation Examples: Via PC
control software
Click the VGA1 or VGA2 button switch to YPbPr or RGBHV source, and chick
the YPbPr button set to YPbPr source.
5. Connect a composite video source (for example, a composite
video player) to the CV IN RCA connector.
6. Connect the HDMI output connector to an HDMI equipped (for
examples, TVs or monitors).
7. Connect the HDBT output connector to a HDBT receiver, and
connect the HDBT receiver HDMI output connector to an
HDMI equipped (for examples, projector or monitors).
Note: 1.When the transmission distance of 100 meters, it
is recommended to use STP Cat6 or Cat 7 cable.
2.When 4K2K signal is output, it is recommended to use
STP Cat6 or Cat7 cable, the transmission distance up to
70 meters.
8. OPTIONAL: Connect an Ethernet cable from the TCP/IP port
on the switcher to a local Area Network.
9. OPTIONAL: Connect an RS-232 cable from the RS232 port on
the switcher.
10. OPTIONAL: Connect the IR receiving extender to the IR IN
port, and the IR emission extender to the IR OUT port.
11. OPTIONAL: Connect LAN1 or LAN2 RJ-45 connector to a
router.
12. Connect the DC 12V Locking power supply to the power
receptacle on the switcher.
13. Connect the power supply to an available electrical outlet.
Ver1.1 Page 21 of 21
