Globaljig SYSTEM, User Manual

Page: 6 / 28

USER’S MANUAL
SYSTEM/VECTOR
CHAPTER 3
3. TECHNICAL CHARACTERISTICS AND DATA
3.1. CHARACTERISTICS
• Name of the Machine: SYSTEM bench with VECTOR arm is the market
name of this Machine, which is a MECHANICAL ARM. The force of this
machine derives from the combined application of a link chain with a
hydraulic cylinder. This cylinder is activated by a manual or pneumatic pump
and transforms the hydraulic pressure into pulling force. The configuration
can be varied, appropriately setting the points where the pulling force is
exerted, modifying both the intensity and direction. This makes it possible to
use this unit on any deformed part of the body of the vehicle that is to be
repaired.
It has three main, mechanically integrated units:
The first consists of a circular notched plate that secures the VECTOR to the
SYSTEM bench.
The second consists of a horizontal body that makes the radial movements
and supports the vertical body.
The third is the vertical body which supports the hydraulic cylinder, the snub
pulley for the chain and the chain itself.
• Operations and Safety
Hydraulic thrust cylinder, driven by a manual or pneumatic pump.
Safety Device to prevent crushing the hand with the lever that
engages/releases radial positioning.
All movements and all operations are operator-controlled.
• Use
The VECTOR unit has been designed and built to be used as the arm that
exerts the force to straighten wrecked motor vehicles. It is to be used in
body shops and can be used on the Benches indicated by the Manufacturer.
Any other use is to be considered improper and, therefore,
unreasonable.
THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR DAMAGES
CAUSED BY IMPROPER, ERRONEOUS OR UNREASONABLE USE OF THE
MACHINE.
The noise produced by the machine is always less than 85 dB (A).