automatic stop, press any button.
NOTE:
To check setting the watch
is in at any time, press the MODE
button. With each press of the
button the vibration and/or beep
will respond if set.
HOW TO USE THE
COUNTDOWN TIMER
1. Repeat Pressing the MODE
button to display
TR
TR
TR
TR
(COUNTDOWN TIMER)
operating mode.
2. Press & Hold the LAP/RESET
Button until the Seconds digits
BLINK. Press the START/STOP
button to set to the seconds
wanted. You can select from
0
to
59
seconds. If you do not wish to
set the seconds, go to #3 below.
3. Press the MODE Button to go
to the hours. The hour digits will
BLINK. Press the START/STOP
button to set the number of hours
wanted. You can select from
0
0
0
0
to
23
23
23
23
hours.
4. Press the MODE Button to go
to the minutes. The minute digits
will BLINK. Press the
START/STOP button to set the
number of minutes wanted. You
can select from
0
0
0
0
to
59
59
59
59
minutes.
5.
Press LAP/RESET button when
you have finished. The display
will stop blinking.
To reset the Countdown Timer
for a different time see "How to
Use the Countdown Timer" and
follow instructions.
TO START THE
COUNTDOWN TIMER,
Press the START/STOP button
(after the countdown timer is set).
The timer will start to countdown.
To interrupt, press the
START/STOP button. Pressing
the START/STOP button again
will start the countdown from
where it last left off.
Note: When Countdown Timer is
set for more than ten minutes, a
short single reminder will advise
you of 10 minutes remaining and
then at 5 minutes remaining.
AUTO RELOAD
COUNTDOWN TIMER
will
automatically reload for the time
preset, when the timer reaches “
0
0
0
0
”
If you do not wish to start the
countdown again immediately,
press the START/ STOP button
twice, if alarm is activated. Press
once to stop the countdown if
alarm is not activated.
To restart the preset countdown at
any time, press the START/STOP
button while in the
COUNTDOWN -
TR
TR
TR
TR
mode.
TO USE THE REPEATABLE
COUNTDOWN TIMER WITH
PAUSES INBETWEEN
When the auto-repeat countdown
timer reaches zero it automatically
alarms and starts to countdown
again for the preset time. You can
cancel the countdown and return
to the original countdown time.
To reset to the original countdown
time PUSH the LAP/RESET
button and HOLD IT for
approximately 2 to 3 seconds.
Digits will flash showing the
amount of time that the countdown
was set for originally.
Push the LAP/RESET button
once, and the digits will stop
flashing. (If you do not push the
LAP/RESET button to stop the
flashing, the digits will stop
flashing automatically after 2
minutes.)
To activate the start of the
countdown when you need it, push
the START/STOP button once.
HOW TO USE THE
STOPWATCH
1. Repeat Pressing the MODE
button to show
STOPWATCH
on
the display.
2. To start the Stopwatch, press
the START/STOP button. The
Stopwatch will start keeping time
and the Icon (symbol at the top of
the display) will flicker to show
the action.
TO STOP THE STOPWATCH,
press the START/STOP button.
Pressing the START/STOP button
again will start the stopwatch
running from where it last left off.
The Stopwatch can count up to
23
23
23
23
hours,
59
59
59
59
minutes and
59
59
59
59
.
99
99
99
99
seconds. Each hour accumulated
shows at the top left of the display.
To RESET the stopwatch to zeros,
press the LAP/RESET button,
when it is in a stop position.
Split Timing on Stopwatch
1. Start the Stopwatch by pressing
the START/STOP button. The
stopwatch will start keeping time.
2. Press the LAP/RESET button.
The watch will continue counting
the time even though you do not
see it on the display. The Icon at
the top of the display will continue
to flicker to show action and that
counting continues.
3. Press the LAP/RESET button
again and the display will change
and show the time that has
accumulated in total.
4.
To RESET the Stopwatch,
press the START/STOP button
and then press the LAP/RESET
button.
HOW TO SET THE SECOND
CLOCK
1. Repeat Pressing the MODE
button to show
SECOND
CLOCK
(T2)
(T2)
(T2)
(T2)
2. Press & Hold the LAP/RESET
button until the Hours digits
BLINK.
3. Press the START/STOP button
to rotate to the hour you wish to
set. (In
12
12
12
12
Hr Mode, use
PM
PM
PM
PM
indicator for correct setting of
afternoon or evening.)
4. Press the LAP/RESET button
when desired hour has been set.
NOTE: Only the hour can be set in
second clock mode. (The minutes
and seconds will be the same as
the Calendar Clock)
HOW TO USE THE EL BACK
LIGHT
Press the LIGHT button to light up
the LCD display at any time. The
screen will be lit for
approximately 3 seconds before
going off automatically.
The EL back light will flash when
an alarm is activated
BATTERY INFORMATION
Your watch uses a Standard 3 volt
lithium CR2032 or equivalent
battery. Battery life will vary due
to how often the EL back light and
vibration function are used.
Batteries should be replaced by a
qualified person to maintain water
resistance.
DISCLAIMER
GLOBAL does not accept any
responsibility what so ever for
any inconvenience or non-
compliance for medication or
any other reminder the watch
may be used for.
SERVICE
This unit should be serviced by
qualified service personnel. The
user should not attempt to service
the unit.
Servicing should be referred to:
Global Assistive Devices, Inc.
4950 North Dixie Highway,
Fort Lauderdale FL USA 33334
Before sending your unit for
service, have the battery checked
and/or try resetting by pressing the
MODE, START/STOP and
LAP/RESET buttons at the same
time and hold until the display
clears.
ONE YEAR LIMITED
WARRANTY
Your VibraLITE 3
is warranted to
be free from defects in material or
workmanship for One Year from
the date of purchase.
This is a limited warranty and
covers watch functions only. This
warranty does not apply to the
battery, band or to any unit which
has been subject to misuse,
negligence or accident. This
warranty is void if the watch has
been tampered with, altered, or
repaired other than by a qualified
service center. At its option,
GLOBAL ASSISTIVE
DEVICES, INC. may select to
replace the unit, rather than repair
it. During the warranty period,
return the watch, with dated proof
of purchase, in a secure package,
insured and with shipping charges
prepaid. No C.O.D. packages will
be accepted. Please include a note
describing the service required and
include $8.50 (check, money
order, Visa, MasterCard,
American Express, or Discover)
for shipping and handling in the
USA. Other Countries please
contact us for pricing.
Copyright:
GLOBAL
ASSISTIVE DEVICES, INC
.
4950 North Dixie Highway
Fort Lauderdale Florida USA
33334-3947
