QUICK REFERENCE
Model VL300
SELECTION OF VIBRATION, BEEP, BOTH OR OFF SIGNAL (S)
Press MODE button until the CALENDAR CLOCK mode shows on the display. Repeat pressing
START/STOP button to select desired function. Icon(s) at top right of display will indicate function:
Vibration, Beep, Both or Off.
A Quick Check to see what function is set, is to push the MODE button while in the Calendar Clock
mode. The function that is set will respond each time you push the MODE button.
SETTING OF ALARMS AND COUNTDOWN TIMER
Press MODE button to rotate to the mode you wish to set. (TR for COUNTDOWN TIMER; A1 or A2
for ALARMS) Press and Hold LAP/RESET button until the digits blink. While digits blink, press the
START/ STOP button to advance the blinking function to the time wanted. Press the MODE button
to change from hours to minutes and advance the time by pushing START/STOP button.
For alarm
settings, hour(s) and /or minute(s) can be set. For countdown timer,
seconds and/or hour(s) and
minute(s) can be set
. Press the LAP/RESET button when completed. (Digits will stop blinking) In the
Alarm(s) mode, the alarm indicator icon shows which alarm is activated.
To reset Alarms & Countdown Timer for a different time, repeat instructions as above.
AUTO RELOAD COUNTDOWN TIMER
When the countdown timer reaches "0", it will automatically reload for the time that was preset. If
you do not wish to start the countdown again immediately, press the START/ STOP button twice, if
the alarm is activated. Press once to stop the countdown if the alarm is not currently activated. To
restart the preset countdown at any time, press the START/STOP button while in the TR
(COUNTDOWN) mode.
HOURLY ALERT SETTING
Press the MODE button until display is in an ALARM Mode. (A1 or A2) Repeat pressing the
START/STOP button until the Hourly Chime icon shows. (Located beside the A2 icon)
Copyright:
Global
Assistive Devices, Inc.
Fort Lauderdale Florida USA
