![background image](http://html.mh-extra.com/html/global/v900-b1/v900-b1_user-manual_2232500024.webp)
V900-B1 GSM REMOTE CAMERA USER MANUAL
24
4.5 Remote control
4.5.1 Add remote control(s) to the device
Description
When a remote control is added to a device, it can control the device. A device
can be added up to 5 remote controls.
Method
Indicator
Operations
Status
Green, flashing or
constantly light.
1. Press and hold the
Set
key
for 2 seconds
Indicator light turns to orange
(Learning mode)
Orange, flashing
2. Press any button on the
remote control (with battery
inside) to send a signal to
V900.
V900 will emit a “Beep” tone and
indicator will turn green for 2S.
(Added successfully.)
Orange, flashing
3. Repeat step2 to load
another new remote camera.
Orange, flashing
4. Press the
Set
key to exit
the learning mode or waiting
for 15 seconds to auto-exit.
Indicator
light
turns
green,
flashing or constantly light. (Exit
learning mode)
Note
During the process of learning new remote control, if the battery of remote control
runs out, V900 device
will emit three “Beep…” tones and exit learning mode. You
need to replace the battery and try learning process again.
4.5.2 Remote control instruction
There are three buttons on the remote control:
A.
Arm V900 device
When
is pressed, the indicator light on V900 device will turn green. This
indicates that V900 device is in armed mode.
Any motion detected by V900 device as well as any activation of added
wireless detector will trigger the camera alarm and a SMS/MMS or phone
calling notification will be sent to the preset numbers.
B.
Disarm V900 device
When
is pressed, the indicator light on V900 device will slowly flash