Adjustment
7
Adjustment
7.02
7.01
Notes on adjustment
Tools, gauges and other accessories
20
Unless stated otherwise, during all adjustment work the
machine must be disconnected from electric supply!
Danger of injury if the machine is started accidentally!
All following adjustment are based on a fully assembled machine
and may only be carried out by expert staff trainned for this
purpose.
Machine covers, which have to be removed and replaced to carry
out checks and adjustments, are not mentioned in the text.
The order of the following chapters corresponds to the most
logical work sequence for machines which have to be completely
adjusted. If only specific individual work steps are carried out,
both the preceding and following chapters must be observed.
Screws, nuts indicated in brackets () are fastenings for machine
parts, which must be loosened before adjustment and tightened
again afterwards.
1 set of screwdrivers with blade widths from
2
to
10 mm
1 set of open ended wrenches with opening sizes from
7
to
13
mm
1 set of alien keys from
1.5
to
6mm
1 clamp
1 metal ruler
1 gauge
Sewing thread and test material