Slightly turn the thread-pulling knife
1
so that its locking screw
2
is
accessible for the hexagonal key
2.5 mm 5.
Loosen the screw
2
and lift the thread-pulling knife
1
in the arrow
4
direction
to touch the counter knife
3.
The thread-pulling knife must not develop any
pressure on the counter knife
3.
The cutting pressure between the knives
1
and
3
will develop during the thread-pulling knife
1
slight turning to the
cutting position due to the elevated position of its cutting edge surface.
Fix the thread-pulling
5
with the screw
2.
Adjustment
7.04
Thread cutter
7.04.01
Thread-pulling knife height
42
Requirement
At the turning to its adjusting position the thread-pulling knife
1
should touch the counter knife
3
without pressure.