![background image](http://html.mh-extra.com/html/global/foli-mechanism-with-ecs/foli-mechanism-with-ecs_user-manual_2232462006.webp)
FOLI MECHANISM WITH ECS+ — USER MANUAL
6
1.3 Before you start
Check for and remove obstacles in path of the table top.
If divergence between the columns will be discovered, please do a manual reset as listed in
section 3.2.
1.4 Electrical rating
Electrical rating, input: 120VAC, 50-60Hz, 3,2A. Output 29V or 35V.
2 Assembly & Adjustment
2.1 Assembly Instruction
The official assembly instruction will be found with the
base components.
Base is for use with an approved surface, provided by
the Global Furniture Group.
2.2 Setup procedure
CAUTION
- Risk of electrical shock:
The power cord must be unplugged while the control
unit is being commissioned.
This table is equipped with the ECS+ system, to setup
the controlling device proceed as follows.
1. Connect the motor cables to the control unit 8-pin motor cables
2. Connect the handset to the relevant socket at the control unit / ECS+
3. Connect the Power Supply to the control unit / ECS+
4. Plug in the power supply to a standard outlet.
At first use, the control unit must register the lowest point of elevation. To reset, press “down” icon and go to lowest level.