background image

FOLI MECHANISM WITH ECS+ — USER MANUAL

3

1 Important Information. SAFETY FIRST!

Your safety and the safety of others are very important. Please familiarize yourself with all instructions and safety warnings before 

operating the table. Please keep this manual for future reference.

To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in 

this user’s manual. This information alerts you to potential hazards that could hurt you or others. It is not practical or possible to 

warn you about all the hazards associated with operating or maintaining a table. Please use your own good judgment.

You will find important safety information in a variety of forms. Safety Messages are preceded by a safety alert symbol 

 and one 

of three signal words: 

DANGER

WARNING

, or 

CAUTION

. These safety messages are listed in order of severity, identify the general 

risks and what actions you are to take to avoid the risks. These signal words mean:

 

DANGER

 - Indicates an imminent hazardous with a high risk of serious injury or death.

 

WARNING

 - Indicates a potential hazardous may result in serious injury.

 

CAUTION

 - Indicates a potential hazardous, which may result in minor or moderate injury. It may also be used to 

alert against unsafe practices.

NOTICE

 - Indicates an alert to call attention to proper assembly instructions or particular operation procedures to assure 

correct equipment function and to avoid equipment damage or wear.

The information and specifications included in this manual were in effect at the time of approval for printing. ROL reserves the right 

to discontinue or change specifications or design at anytime without notice and without incurring any obligation whatever.

1.1 Important safety instructions please save these instruction.

When using an electrical table, basic precautions should always be followed, including the following:

Read all instructions before using table.

 

DANGER

 - To reduce the risk of electric shock:

1. 

Always unplug this furnishing from the electrical outlet before cleaning.

 

WARNING

 - To reduce the risk of burns, fire, electric shock, or injury to persons:

1.   Unplug from outlet before putting on or taking off parts.

2.   This table is not intended for use by children or individuals with a physical or other impairment that may affect the 

ability to safely operate equipment. ,

3.   Use this table only for its intended use as described in these instructions. Do not use attachments not recommended by 

the manufacturer.

4.   Never operate this table if it has a damaged cord or plug, if it is not working properly, if it has been dropped 

or damaged, or exposed to water. In the event of any such event please return the table to a service center for 

examination and repair.

5.   Keep the cord away from heated surfaces.

6.   Never operate the table with the air openings blocked. Keep the air openings free of lint, hair, and the like.

7.   Never drop or insert any object into any opening.

8.   Do not use outdoors.

9.   Do not operate the table in a potentially explosive atmosphere.

Summary of Contents for FOLI MECHANISM WITH ECS+














Reviews: