![background image](http://html.mh-extra.com/html/global/foli-mechanism-with-ecs/foli-mechanism-with-ecs_user-manual_2232462004.webp)
FOLI MECHANISM WITH ECS+ — USER MANUAL
4
10. To disconnect, turn all controls to the off position, then remove plug from outlet.
WARNING
- Risk of Electric Shock:
1. Connect this table to a proper outlet only. For loading always put heavier items at the bottom and not at the top in
order to help prevent the possibility of the furnishing tipping over.
WARNING
- Risk of Injury to Persons:
1. Do not use this table to lift people and do not use the table to lift heavy parts or use this table as a platform for storage.
2. Maximum intended load is 265 pounds uniformly distributed (120 kilograms) including the table top.
DANGER
- Risk of electric shock, injury, or death:
1.
Improper usage, abuse, or misuse of the power supply, handset, motors and other electrical components may result in
an electrical shock injury or possible death.
2. Do not open the power supply unit or handset under any circumstances. The power supply and handset contain no
serviceable parts.
3. Do not modify or make any changes to the power supply, handset or other electrical devices.
4. During installation, repair, cleaning, or maintenance work, the power cable must be disconnected from the outlet.
5. The engines/motors control unit is not designed for continuous operation. Changing the desktop position without
interruption must not exceed the duty cycle indicated on the power supply. The unit is thermally protected and will
temporarily shut down if use exceeds the duty cycle. Allow a 9-minute cooling period for the control unit to reset.
6. The power supply unit may only be operated with voltage as specified on the power supply label.
7. Only use the power cord supplied with the power supply. Check that it is not damaged. Do not operate the power
supply unit if the power cord is damaged.
8. Connect the power supply to a proper outlet only. To disconnect turn all controls to the off position, then remove plug
from outlet.
9. In the event of a malfunction (e.g. if the control unit keeps adjusting the desk because a movement button has jammed),
please unplug the unit immediately.
10. Do not expose the power supply, control unit/ECS+, handset or other electrical device to water or other liquids
including moisture, drips, splashes or spills. Only clean electrical device with a dry cloth.
11. Do not operate the power supply, control unit/ECS+, handset or other electrical device in a potentially explosive
atmosphere. Do not operate where aerosol spray products are being used or where oxygen is being administered.
12. Do not use the desk with if it has been dropped or damaged. Contact the manufacturer for examination or repair
13. It is not allowed to connect self-constructed products to the power supply, control unit/ECS+, handset or other
electrical device. To prevent damage, use only approved OEM components
WARNING
- Risk of injury, or death:
1. During the raising or lowering of the table there exists a risk of squeezing or pinching between the moving desktop and
fixed objects.
2. The necessary safety margins depend on the greatest type of injury risk that can be predicted. Where possible small
pinch points exist (i.e. fingers) use at least a one inches (2,5 cm) safety margin and for body or head (especially where
children may be present) use a minimum of 16 inches (41 cm) count from the floor or from their top of the table feet if
that is relevant
3. During the lowering or rising of the desktop, the operator must ensure that no person or object risk being harmed by
the operation.