![background image](http://html.mh-extra.com/html/global/318513/318513_operation-manual_2232495013.webp)
318513
www.globalindustrial.com
.
10
6. User Parameters Setup
1. In normal weighing mode, press UNIT and ZERO/ON/OFF until “
USer
” is shown to
enter in the mode.
2. Press
the
UNIT key to change the flashed digits, press the HOLD/PRINT key to shift
the flashed position. Press the TARE key to confirm and save the set data and enter
next setting. Press the ZERO/ON/OFF key to exit this mode.
3. Summary of User Parameters Setting:
Parameter Option
Setting
setting
U1
0 - 15
Auto-off time:
0: no auto-off function;
01-15: when no weight change or key operation is
occurring, the scale will auto power off after 1-15 minutes.
05
U2
0, 1, 2
Backlight on-off mode option :
0= Backlight is always off;
1= Backlight is always on;
2= Backlight is auto on and auto off. The backlight will
auto off after 10 seconds of stable weigh or no key
operation, and it will auto on when the scale weight is
unstable or key operation is occurring.
2
U3
0, 1, 2
HOLD/PRINT key function set:
0=HOLD, 1=PRINT; 2=HOLD and PRINT
2
U4
0 - 50
Hold function mode:
0=no hold function;
1=hold larger weight reading;
2-50=when weight is more than 10d and the variety is
within ±2d
~
±50d, hold stable weight; When weight is
below 10d and then over 10d and becomes stable, the
new stable weight will be held.
2
U5
0 - 7
Serial communication output format:
0=communication is disabled
1=output stable weight, unit and status data after PRINT
pressed, data has not been received;
2=output gross, tare, net weight, unit and status data
after PRINT pressed; data has not been received;
3=continuously output displayed weight, unit and status
data, data has not been received;
4=continuously output gross, tare, net weight, unit and
status data, data has not been received;
5=output weight, unit and status data one time when
scale becomes stable;
6=output gross, tare, net weight, unit and status data one
time when scale becomes stable;
7=Command –response mode.
1
U6 3
Baud rate for Serial communication:
0=1200
,
1=2400
,
2=4800
;
3=9600
;
4=19200
3
U7 0
Serial communication data format:
0=8N1
;
1=7O1
;
2=7E1
0