User’s Manual
6
2. Install the fan blade holder to the motor assembly with (H8) Ф6
lock washers and (H7)1/4-20x3/8”long screws.
3. Install the fan assembly to the mount bracket as shown below:
Route wires and safety cable through downrod cover, canopy
cover and ceiling canopy. Install the downrod with motor
assembly through the canopy, canopy cover and downrod
cover.
Remove the two set screws from the downrod and retain for reinstallation. Install the(H4) mounting pin by aligning the holes in the
downrod support with holes in the downrod. Secure pin with (H6) cotter pin. Install and tighten the two set screws with nuts in the
downrod support.
Industrial DC Ceiling Fan
2
4
3
5
6
See Detail A&B
DETAIL A
DETAIL B
It is critical that the mounting pin in the downrod support is properly installed
and the set screws and nuts are securely tightened. Failure to
do so could
result in the fan falling.
