globalindustrial.ca
Distribucion Industrial Globales S DE RL DE CF
User's manual
Manual del usuario
Manuel de l'utilisateur
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
México: 01.800.681.6940
Service à la clientèle
Canada: 888-645-2986
1
052416
18 Inch Internal Orbital Blower Fan
Model 292607
READ & SAVE THESE
INSTRUCTIONS
CAUTION:
Read and follow all instructions before
operating fan. Do not use fan if any part is
damaged or missing.
WARNING:
• To reduce the risk of fire or electrical shock,
do not expose to water or rain.
• To reduce the risk of fire or electrical shock,
do not use this fan with any solid state speed
control device.
• To reduce the risk of injury, disconnect
from power supply before servicing.
• If the power supply cord is damaged, contact a
qualified service center electrician to install an
appropriate replacement cord.
• The appliance is not intended for use in
locations where special conditions prevail, such
as the presence of a corrosive or explosive
atmosphere (dust, vapor or gas ).
• This appliance must be used safely and with
supervision. Keep away from children or
unauthorized users. Never leave unattended.
• This fan should not be operated outside.
SIZE VOLT AMP WATT SPEED
RPM
CFM HP
18"
120V
0.7A
80W
3
1365/1250/1150 3980 1/32
TO ADJUST AIRFLOW UPWARD OR DOWNWARD:
Tilt fan
head to the desired angle. This high velocity fan can be used alone or in
conjunction with air conditioning. Rotating the fan head upward serves to
pull air from the floor and circulate it throughout the entire room.
SPEED CONTROL:
For stationary operation select fan speed by
turning the switch to the left to either High (3) - Medium (2) - Low(1).
0 is off position.
CLEANING:
WARNING:
Unplug from electrical supply
source before cleaning.
1. Use soft damp cloth to clean, then wipe with
dry cloth.
2. Do not use a cleaning solution that is harmful
to paints or plastics.
OPERATING INSTRUCTIONS
INTERNAL ORBITAL FUNCTION:
The blade will orbit internally in this mode while
the fan is running at any speed. Turn the switch to
right to either High (3) - Medium (2) - Low(1).
0 is off position.
